BK-BKW-BKS-GBK-NBK到底是什么意思

BK-BKW-BKS-GBK-NBK到底是什么意思

BK-BKW-BKS-GBK-NBK到底是什么意思

Designation	Symbol	Description
交貨狀態(tài)	代號	說明
Cold finished (hard)	BK（+C）	Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation
冷加工(硬)		最后冷加工之后不進行熱處理, 從而管子只可能進行很小的變形.
Cold finished (Soft)	BKW （+LC）	The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding)
冷加工(軟)		最后熱處理之后進行小變形量的冷加工, 對鋼管再加工時允許有限的冷變形(例如: 彎曲, 擴口)
Cold finished and stress-relieved	BKS（+SR）	Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree.
冷加工后消除應力退火		最后冷加工后在Acl點以下進行退火, 以消除冷加工應力.
Annealed	GBK（+A）	The last Cold forming process is followed by annealing in a controlled atmosphere.
退火		最后冷加工之后,鋼管在保護氣體下進行完全退火.
Normalized	NBK（+N）	The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
正火		最后冷加工之后,鋼管在保護氣體下進行正火.

公司主營包鋼、鞍鋼、濟鋼、天津大無縫管、冶鋼產(chǎn)流體管、鍋爐管、厚壁無縫管等無縫鋼管庫存大，規(guī)格全，歡迎您的采購！

銷售電話：、

手機：

傳真:

網(wǎng)址:zokomobile.com